Quick Answer: Dogberry Collections Flexible Fluted Wall Panels in Natural are bendable wood-finish fluted panels that conform to curved walls, archways, columns, and irregular surfaces — sold in 2-panel packs at $149, each panel approximately 94″ × 9.5″. The Natural finish is a light, barely-toned wood look suited to bright, Scandinavian-influenced, and coastal interiors.
Most wall panels are rigid — they work beautifully on flat walls and stop working the moment you hit a curve. The Flexible Fluted Wall Panel is engineered specifically for the surfaces rigid panels can't handle: curved accent walls, archway reveals, columns, fireplace bump-outs, and any application where the panel needs to flex rather than snap. The fluted profile adds architectural column-like depth to the surface, and the Natural finish keeps the palette light and airy — open-grain, barely-tinted, with the clean simplicity of Nordic and coastal interiors. Install it curved around a bedroom archway, straight across a living room wall, or as a full wrap around a column or island.
Key Features
- Flexible construction — bends to conform to curved walls, archways, columns, and irregular surfaces
- Fluted profile — vertical groove pattern adds column-like architectural depth
- Natural finish — light, barely-tinted pale wood tone; suited to bright, minimal, and coastal interiors
- Sold in 2-panel packs — approximately 15 sq ft of coverage per pack
- Panel dimensions — each panel approximately 94″ tall × 9.5″ wide
- Works on flat walls too — not limited to curved applications
- Lightweight and easy to handle
Panel Specifications
| Spec | Details |
|---|---|
| Pack Contents | 2 panels |
| Panel Height | ~94″ (approx. 7.8 ft) |
| Panel Width | ~9.5″ |
| Profile | Vertical fluted grooves |
| Coverage per Pack | ~15 sq ft |
| Flexibility | Bends for curved surfaces and archways |
| Finish | Natural |
Where to Use Flexible Fluted Panels
- Curved accent walls — any radius that a rigid panel would crack around
- Archway reveals — wrap the inside or face of a doorway arch
- Columns and posts — full wrap around structural or decorative columns
- Kitchen islands — curved ends of an island or peninsula
- Fireplace bump-outs — any non-flat fireplace surround surface
- Standard flat walls — works perfectly on flat surfaces too
What's Included
- 2 flexible fluted wall panels (Natural, ~94″ × 9.5″ each)
- Installation instructions
Installation
Mount using construction adhesive applied to the back of the panel. For curved surfaces, hold or tape in place while adhesive cures (typically 24 hours). Panels can be cut to height with a fine-tooth saw. See our guide: How to Install Wall Panels.
Also available in Oiled Oak and Smoked Oak. For flat-wall acoustic panels, see our Acoustic Slat Wall Panels with sound-absorbing felt backing.
